Acura Legend Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
159 Posts
Discussion Starter · #1 ·
Well, I got a new muffler put on today, a PowerTech off of ebay. Looks great and has a nice deep tone, BUT the facker is WAY TOO LOUD.

Is there ANYWAY to silence it a bit?

Before i had it put on, i was checking out the inside and i could see all the way through. I don't know if there is anything that i could shove in there (not a banana or potato) to silence it a bit.

TYVM!!!!!!!!!!
 

· Registered
Joined
·
332 Posts
check out summit racing or jc whitney. i think they both sell silencers. some cap the muffler, others are welded into the pipes.
 

· Registered
Joined
·
159 Posts
Discussion Starter · #5 ·
check out summit racing or jc whitney. i think they both sell silencers. some cap the muffler, others are welded into the pipes.
thx man. summit racing was very helpful. i purchased an insert from there that goes/welds into the exaust pipes after the cat.

if anyone else wants to reduce the sound of how loud you muffler is, check out this product http://store.summitracing.com/partdetail.asp?part=24855
and this website
http://www.carchemistry.com/ccinserts.html or just wait and i'll tell you if it makes a difference. Carchemistry website and charts show that this actully increases low and mid end power. :confused: I don't know if that's bs or not, but i don't care since i'm trying to quiet the sound.

THX AGAIN MAN.
 

· Registered
Joined
·
120 Posts
This is just what I've been looking for. Thanks for sharing. How much would this cost to have installed at a muffler shop? Also, can you let us know of the results after installation?

Thanks:)
Ken
 

· Registered
Joined
·
159 Posts
Discussion Starter · #7 ·
well.....i'm having it put in tuesday at the latest so i will let you know. to install my muffler i was charged $80, so i figure it should be about half that since they only have to re-weld half the spots, but who knows. i'm also getting my ac worked on and a pressure switch put on so he might cut me a break on the welding. i hope so....i've only spend 2k there in the last month.:D
 

· Registered
Joined
·
120 Posts
Hey Bulldawg, any word on the installation of the exhaust insert?
I'm impatient, I already ordered mine. I hope all turned out well.

Ken
 

· Registered
Joined
·
159 Posts
Discussion Starter · #10 ·
KenS

.....it quieted it 50%-60% IMO. It still has a nice deep tone when i'm sitting still and rev it up but when i'm driving i can't hear my exhaust unless i get on it.


I wish i would have gone with the 2disc application, but the 3 is fine with me. I wish the 2 disc b/c it seems to have sapped the power i've gained and back to stock performance. BUT.....this could be in my head b/c it's not as loud.
 

· Registered
Joined
·
120 Posts
Thanks for the info. I would have thought you may have gotten some low to mid range torque from this and just not as much HP on the high end. I'll probably get mine installed tomorrow.
 

· No So*p For Yo*!
Joined
·
430 Posts
is it THAT bad before the "silencer" thingy? is it really loud at idle? i was thinking of getting one of those and dumping it in my mom's car. :p hahaa.. yea, i know i shouldn't, but i drive her car a lot too.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top