[Shaar]

yup i already found it earlier

i'm currently sealing the deal with the seller for this. yay :2cool:

edit: also sealing the deal on the power folding mirrors for the coupe, and also the jdm navigation so i can make a custom bezel for the space up top

i'm so happy! I've been looking for all of these items!

 

[Shaar]

You guys will have to beat me out for these im ready to lay down some big $$ I have had them "watched" few minutes after they were posted

Just want center console and the navi, I am going to take them and make molds and make copies to sell on here to you guys

already sold to me sorry shaylord! i feel bad! but i already talked to him and the deal is done. he already sold the mirrors tho boo hoo

 

[Shaar]

i know about the ebrake handle. i'm not planning on actually using the nav i need the bezel around the nav.

and what kind of molds are in plans? i'm kinda curious are you just planning on making molds of the center console so us people here in the US can fit a blank in there or are you going to actually get them wood laminated and such? i'm pretty curious it sounds real interesting!

the only problem i see with this setup is the vents are missing from the center console. it has the holes, but there are no adjustable vents... wonder where to get those at?

 

[Shaar]

i had a carputer less than a month ago but parted the whole thing out. i still have the double din screen enclosure tho.... don't know what to do with it...

 

[Shaar]

just finding the video inputs of the monitor would be awesome... like on the board inside the unit, then use it as a normal monitor. that would be the ish.... i know that people have done that with the small psone monitors, they hacked them to use as normal video monitors. all you have to do is find the R,G,B, H-sync, and V-sync... theres a few more like ground.. and i dont know what i'll have to do some research, but it is VERY do-able. now, the use of that monitor and the factory nav, you would of course, need the oem brain and gps reciever and as its been said before, if you do in fact get ahold of those parts, it is only useful in japan due to software restrictions!

looks like i have something to research over winter break

maybe RL nav/legend nav hybrid? haha yea right! i'm getting my own hopes up! make me stop! lol

 

[Shaar]

Awesome auction! But cutting that heated seat wood piece is a real pain and its very hard to do nicely. I've tried it before and i gave up. You have to cut a lot off. And I'm not sure if it lines up with the switches in the USDM Legend. But if you can do it then that would be really cool! This will be an awesome project. Let me know if you need any info.

the heated seat switches will not line up. this will have to be taken care of also. i'm talking to the guy with the auctions and hes looking to see if he has the entire jdm console. its a tan interior car hes parting out. so i'm asking him to pull the console from the lower dash all the way to the arm rest. then i can have more room to work with it.

btw, where in MO are you? stl i'm going to assume...

 

[Shaar]

If you take out the navi screen and the bezel around it you could fit a fairly good sized screen there. then just relocate the heater controls into the center console. i would find the screen too low if it was in the centre console but thats just my opinion.

yes the screen is too low in the bottom. i parted out my carputer becuase i got tired of it. the loading time from it turning on to being able to be used wasn't worth it. so i sold it. i'm prob going to get a dvd headunit with seperate screen or something.... i'll play around with it when i get it.