Acura Legend Forum banner

TYPE 2 COOLANT New and Improved

4838 Views 21 Replies 14 Participants Last post by  Tinkindling
How many liters or U.S. gallons do I need to do a complete flush of the original coolant and replace it with the new and improved TYPE 2 coolant?
1 - 3 of 22 Posts
i believe type I would be 100% coolant and Type II would be 50/50.

If you're good at mixing water, i would get the Type I to save money.

At least that's what i did :D
the mixing depends on the environment you're in.

in hotter climate, i would rather use 30% coolant and 70% water.

In super extreme hot temperature (like death valley hot), I would use pure water with RedLine WaterWetter.
that's why pure water can only be used at extreme conditions. not recommended for everyday driving.
1 - 3 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.