Acura Legend Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
hey guys, going to buy some wheels for the legend. i noticed the stock wheels sit 'in' from the fender by about 1in. id like to get a set of wheels that will be flush with the fender, but not stick out or look 'skatebored'
if the factory wheel is a +45mm, what should i get to fill out the fender well. Thanks in advance
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top