Acura Legend Forum banner
1 - 20 of 37 Posts

·
Registered
Joined
·
1,351 Posts
Discussion Starter · #1 ·
lol here's my car, let me know what you guys think... i think my rims are pretty g4y because they are 18's but look like 17's :( the dual exhaust eats up a lot of gas, but makes the white dragon look even meaner. holla one.




:eek: there goes my rent money :eek: time to live in the car for a couple months lol
 

·
Registered
Joined
·
126 Posts
That is spicey!
Love ya work!
Can we get some pics from a bit further away, get the whole thing, and yeah I know not the front yet.
But that is one nice car!

Respec' the 4 door
 

·
Registered
Joined
·
157 Posts
I like! :)
 

·
Registered
Joined
·
100 Posts
Darith!

You ripped off my rims!! lol!! it's not that bad... they are 18s, I've seen 17s, they look like 15s, haha. Nice look, nice body kit.. so you finally got a body on it.. and some rims.. what did you use to lower the car? btw, you all seen my car right?:D
 

·
Registered
Joined
·
653 Posts
My car is still lower than yours!!!!!! heheheh good work. Nice to see the shop did a good job on the install. You need to lower it FOOL. Then you will join the SCRAPERS Club. Now all it needs is some Skyline tailights and a Skyline front bumper and it could almost be familiar heheheheh........
 

·
Registered
Joined
·
1,351 Posts
Discussion Starter · #17 ·
Blo - thanks a lot, it'll be a while until it's done... (ive got to wait until my funds come in *chuckle*)

mYbabYLeGend - hahaha j00 want a piece of it? is that a sexual connotation? :D lol jp thanx yo

Shadow - far away?? what angle? :confused:

legenddriverc - :) thanks, it's a cyber kit, the back was custom made from vis and they took the sideskirt design from the spyder jdm bodykit.

SammyD - SAMMMMY~!!!!! I miss your car man!! Thanks, I hope I'm going into a good direction.... this stuff isn't easy... too much money :eek: !!! How's da car comming? I haven't been browsing around the forums too much so I'm kind of behind...

borntohoop - it's a nice kit, just make sure the rear bumper is professionally installed with brackets and everything... or else the bumper will be hanging off because it's quite low. Ask R3.2Cyber.

jose3030 - thanks, I'm just using some of my aerodyamic photography skills lol I plan on taking a shot from an overhead view from the 2nd or 3rd story. I love those shots. I became the camera.

Steve91LS - awwwwww man you're the best! You made me feel so much better because I really didn't think doing anything to my car was a good investment unless I'd be able to go into car shows, etc, but that's a loooong way. I see you like to live your life and spend too (just by looking at your sig). I won't sweat it.. thanks steve! :p

Leon Millette - thanks bro, man I love rims with phat lips... What do Work wheels look like?

Triton3K - wowee thanks, welcome back again...

ATLimaging - Doug!!!!! I love your car !! I've been getting a few comments about how the design of the legend was good before I got my bodykit. Makes me feel bad about getting it, but oh well.

xenonk - hahahaha man i didn't know it was going to happen because I wanted some other rims... I will try to sell these and get the rest of my bodywork done, then get the rims I want... either white rims and chrome rims with a phat lip! Your car is lookin good so far.

R3.2Cyber - John~!!!!!!!!! wutchoo doin h03! hahaaa sorry been a long while since I been around, just got back into austin, and the hills and bumps are crazy!!!!! I still scrape, but it's all good hahahmy cyber brotha, take it easy
 

·
Registered
Joined
·
100 Posts
Work Wheels are the $#!T

here are some links for some work wheels.. www.importhookup.com from www.wheeloptions.com had some specials and sales for Work Rims!! (I was about to order a set of Work Miester2 for my WRX/Legend) The size I was looking for was 18"x9" with a +65 or +72 offset, end up paying mad money for those, but it's definite one deep dish look!

here are the links:
http://www.takakaira.com/php/table.php3?id=80&cat=5
http://www.importhookup.com/wheeloptions/work.htm

Here is the VS-XX wheel
http://www.takakaira.com/rimsandtyres/work/vs-xx.jpg
Here is the Miester S2R wheel
http://www.takakaira.com/rimsandtyres/work/meisters2r.jpg

The other company is WISE
Here is part of the WISE LINE UP (remember, all Jap Rims, wont find them here):
http://www.takakaira.com/rimsandtyres/wise/superwademesh.jpg
http://www.takakaira.com/rimsandtyres/wise/superwade19.jpg
http://www.takakaira.com/rimsandtyres/wise/stimulator.jpg
 

·
Registered
Joined
·
1,351 Posts
Discussion Starter · #19 ·
Re: Work Wheels are the $#!T

xenonk said:
here are some links for some work wheels.. www.importhookup.com from www.wheeloptions.com had some specials and sales for Work Rims!! (I was about to order a set of Work Miester2 for my WRX/Legend) The size I was looking for was 18"x9" with a +65 or +72 offset, end up paying mad money for those, but it's definite one deep dish look!

here are the links:
http://www.takakaira.com/php/table.php3?id=80&cat=5
http://www.importhookup.com/wheeloptions/work.htm

Here is the VS-XX wheel
http://www.takakaira.com/rimsandtyres/work/vs-xx.jpg
Here is the Miester S2R wheel
http://www.takakaira.com/rimsandtyres/work/meisters2r.jpg

The other company is WISE
Here is part of the WISE LINE UP (remember, all Jap Rims, wont find them here):
http://www.takakaira.com/rimsandtyres/wise/superwademesh.jpg
http://www.takakaira.com/rimsandtyres/wise/superwade19.jpg
http://www.takakaira.com/rimsandtyres/wise/stimulator.jpg
$486 FOR ONE WHEEL WITHOUT TIRE?! GAGH.... I'll wait till after college to get that! I love that phat lip, *sigh*.
 

·
Registered
Joined
·
1,485 Posts
Re: Re: Work Wheels are the $#!T

legendarith said:


$486 FOR ONE WHEEL WITHOUT TIRE?! GAGH.... I'll wait till after college to get that! I love that phat lip, *sigh*.
And those are the beginning prices, Work Equip, Rezax or VS models can run up to $1,400.00 a wheel, especially those with the DDC lips (Dynamic Dimple Composite) and NDP chrome:( :eek:
 
1 - 20 of 37 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top