Acura Legend Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,448 Posts
usually, the 6x9's will just be plug and play. for these speakers, it has a passive crossover that plugs into the woofer and a separate wire plugging into the tweeters.

so basically, you plug u'r speaker wire into the +/- leads of the wire they supply you with. and then plug the other ends to the speaker (there's 2 sets of +/-)
and that's it. the only thing is, there's a small box that's wired inline with the wire they supply you with (passive crossover). you have to mount that somewhere so it doesn't bounce around inside u'r door.
-j
 

·
Registered
Joined
·
1,448 Posts
for the front, mount the xover inside the door. the front door is hollow so you can zip tie it to anything in there.
as for the back, after you hammer the the hole tomake the 6x9 fit, put the xover inside the hole and mount the speaker. that's the quickest and easiest way to do it.
-j
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top