The Acura Legend & Acura RL Forum - View Single Post - Still cutting out when driving...but no codes showing???
Acura Legend Forum Acura Legend Forum

Auto Insurance

» Featured Product
Wheel & Tire Center

Go Back   The Acura Legend & Acura RL Forum is the premier Acura Legend Forum on the internet. Registered Users do not see the above ads.
View Single Post
Old 02-11-20, 07:42 PM   #2 (permalink)
Registered User
Join Date: Nov 2009
Location: Salem,NH
Posts: 7

Hi ellisjay2
I would first check your dipstick to see if water is in
your oil. possible gray oil or at least high on the stick. Since you mentioned you have a seeping head gasket, if water is getting into your cylinders, you might be experiencing vapor lock that drains down after turning over the motor if you are lucky. If not this could cause serious damage to your motor. Your temp gauge would run hot also. Also check crank position sensor. I had a 94 Legend that overheated, cylinders vapor locked and had to have heads pulled and plained not a simple or cheap job. Lucky for me, my son is a mechanic. Good luck
94Acleg is offline   Reply With Quote
Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 03:44 PM.

Powered by vBulletin®. Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© AutoGuide