Acura Legend Forum banner
1 - 20 of 79 Posts

mellofelow

· Registered
Joined
·
865 Posts
Discussion starter · #1 · (Edited)
There has been quite a few inquiries for Stromung exhaust system. Given the success of the previous GB, they granted my request to produce another batch for our faithful Legend family members.

This summer season, they have been busy producing premium exhaust systems for new BMW M-series and one of my personal dream car... the Nissan GT-Rs. The exhausts are all dyno tested to fine tune and improve HP. For the Legends, the numbers showed gains in the mid-range, which is great for all around driving.

Here are the details of the muffler/exhaust system.

• 2 ½ inch pipe direct bolt-on with flange.
• Stainless steel muffler and B-pipe
• Dual 3" tips (angled to match OEM style)
• Installation kit includes gasket, nuts and bolts
• Package as pictured below

Stromung agreed to keep the price same as previous which is $440.00 + shipping. B-Pipe is also available for $115 + shipping. Muffer and B-pipe combine as one shipping price.

The cost of delivery will be dependent of US time zones. The price breakdown are as follows. Note: I will have to double check whether shipping price has gone up since.
• Eastern = $40
• Central = $35
• Mountain = $30
• Pacific = $25
• Local pickup = $10 (location Cypress, CA 90630)

Since there a few buyers pending, Stromung will start producing the exhaust systems starting 2nd week of September.

Sorry to the G1 owners... this will be for G2s only!

Purchase Agreement:

• Payment method: Visa, Master, AmEx (others please contact me)
• Cost: $440 plus respective shipping cost.
• Payment Due: Prior to shipping. YES! Prepayment is not required!
• Deposit: NONE! However, I will require a good faith commitment and Credit Card number as reservation. Your card will not be charged until packaging for delivery.
• Invoice: The payment charged will be directly from Stromung.
• Shipping: The shipment will also be directly from Stromung.

If you agree with all the above, please respond via PM or email (MelloFelow@aol.com) with the following details.

1. Legal Name (same as Credit Card)

2. Forum User ID

3. Shipping address

4. Vehicle Year (G2 models only)

5. Vehicle Model (coupe/sedan)

6. Credit Card # (expir date)

7. Email address

8. Contact # (easiest to reach)

9. Muffler or B-pipe or both


Please rest assured that your credit card information is safe and secured. I will only keep the data confidential in the interim until the order is turned over to Stromung. PLEASE!!! Do not post any private purchase information requested above. I will do my best to update everyone the progress of this special offer.

Here are some pictures. Please feel free to contact me via PM or email to Mellofelow@yahoo.com

Image


Muffler Exhaust Buy List:
1. Bluehalo1 --- (shipped)
2. chingatorz --- (shipped)
3. Escobar --- (shipped)
4. jordanakadaking --- (shipped)
5. 93 legend --- (shipped)
6. twogunzup --- (shipped)
7. PrimeTimeTSA --- (shipped)
8. williadb2000 --- (confirmed)
9. DandDEE

B-Pipe Buy List:
1. Bluehalo1 --- (shipped)
2. chingatorz --- (shipped)
3. Escobar --- (shipped)
4. jordanakadaking --- (shipped)
5. 93 legend --- (shipped)
6. twogunzup --- (shipped)
7. PrimeTimeTSA --- (shipped)
8. williadb2000 --- (confirmed)
9. DandDEE

 
mellofelow is at it again. :thumbsup: Hope this next GB is a success.
 
Discussion starter · #6 ·
I just want to say I love my stromung. Mellow; you said it's only available for G2 owners, but you ask for vehicle year (yes G1 and G2). Just a heads up :thumbsup:
Thanks for looking out! Edited... BTW, come out to the next local meet.
 
ok sorry to be a pain in the ass by asking questions but better safe than sorry.

if i have a stock exhaust setup, which i believe is 2.25'' setup, and i buy this stromung setup, will it be a direct fit with no modifications (since its a 2.5'' setup)? will i need a new Y pipe or a new cat? or will this fit like a glove??

info please!! thanks in advance
 
Discussion starter · #10 ·
anyway I can get a gasket from the bpipe to the exhaust only? I have some exhaust leak in that area and can't find a new gasket.
Let me check on that. May cost a few bucks though. Have you tried Permatex?

if i have a stock exhaust setup, which i believe is 2.25'' setup, and i buy this stromung setup, will it be a direct fit with no modifications (since its a 2.5'' setup)? will i need a new Y pipe or a new cat? or will this fit like a glove??
No worries. Both pipes are direct bolt on from flange to flange. Many people have run muffler only... but to maximize the dyno numbers Stromung tested, it was combined with the B-pipe. In fact, one of the buyer wanted the b-pipe only just because his was rusted through.
 
Hey Efong I might be interested... If I can't get my current muffler to quiet down, I will join this Gb. I'll probably have to end up cutting off the piping though, to fit my RL.... will let you know. Just wondering, do you think it is possible to just get the muffler by itself?
 
1 - 20 of 79 Posts